Current language: English - Malaysia
BACK TO PRODUCT CATEGORY
Short-throw projector for high impact presentations
PT-TW380
Designed for education and corporate environments. LCD, 3 300 lumens, WXGA projector
Main product image
Key Features

LCD, 3300 lumens, WXGA

20 000 hours lamp replacement cycle in Eco mode

Projects 80 inch screen from a distance of only 80cm

Wireless projection capability (optional)

16 000: 1 contrast ratio

Short-throw projector for high impact presentationsDesigned for education and corporate environments

Short-throw projector for high impact presentations. Designed for education and corporate environments

PT-TW381RPT-TW380PT-TX440PT-TX350
Brightness3.300 lumens3.300 lumens3.800 lumens3.200 lumens
ResolutionWXGAWXGAXGAXGA
Contrast Ratio16.000:116.000:116.000:116.000:1

A maximum 20.000 hour *1 lamp replacement cycle and 10.000 hour *2 air filter replacement cycle

The PT-TW371R Series has a maximum lamp replacement cycle of 20,000 hours.*1 The air filter also has a
replacement cycle of 10,000 hours.*2 This reduces maintenance hassles for long periods of use, and helps to lower
maintenance costs and reduce environmental impact.

Lamp ControlReplacment cycle of lamp
Eco20.000 hours
Normal10.000 hours

Ease of installation

Corner keystone correction enables angled projection

All you need to do is designate for points as the corner of the projected image, 
and this function easily carries out horizontal and vertical keystone correction.

Curved screen correction

Barrel and pincushion distortions are easily corrected when projecting 
onto a curved screen.

Easy remote monitoring and control over a LAN

Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status.

In addition, Multi Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.

The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.

Easy lamp and air filter replacement simplifies maintenance

For easier maintenance, you can replace the lamp from the top and the air filter from the side, even after the projector is installed on the ceiling. This eliminates the need to detach the projector from its mounting bracket in ceiling-mounted applications.

 

* Supported by Windows® 7 and Windows® 8. Please note that some functions that can be used on professional displays cannot be used on projectors. And the SPDriver setting should be set to "Touch mode". ** Multi-touch Screen LED Display : LFB70 and BF1 Series (TH-50LFB70/65LFB70/80LFB70 and TH-50BF1/ TH-65BF1/ TH-80BF1)

*1 This is the maximum value when the lamp power is set to Eco2. The usage environment affects the lamp replacement cycle, *2 The usage environment affects the duration of the filter.

Multiple useful features

Easy wireless projection by optional module

Simply inserting the optional ET-WML100 Wireless Module into the USB port on the projector enables easy wireless projection from Windows PCs, iOS devices, or Android devices on which the proper freeware is installed.

Presenter Light for Windows® PCs

• Pictures, videos, and any documents including PDF files/Power Point files, whatever are displayed on the PC screen can be projected.
• The images from up to four PCs can be projected simultaneously.

For more information about Presenter Light software or to download the software, please visit the software download page.

VueMagic™ Pro* for iOS/Android Devices

• Pictures, some documents including PDF files can be projected.
• Live camera mode / Annotate mode can be used.
• The images from up to four devices can be projected simultaneously.

* VueMagic™ Pro is a product of Pixelworks, Inc. For detailed information, refer to the following website.

Memory viewer function

In addition to JPEG/BMP image and text files, PDF files can be projected by simply inserting a USB memory device containing the data into the USB memory port. Now you can start your presentation without having to connect to a computer.

Show more

Product
Image Data

Service and Support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Specifications

Projector type LCD projector
LCD Panel | Panel Size 15.0 mm (0.59 in) diagonal (16:10 aspect ratio)
LCD Panel | Number of pixels 1,024,000 (1280 x 800 pixels) x 3
Light Source 230 W x 1 lamp
Light output 3,300 lm
Lamp replacement cycle*2 Normal: 10,000 h/Eco: 20,000 h/Quiet: 10,000 h
Filter Replacement Cycle Normal: 5,000 h/Eco: 6,000 h/Quiet: 10,000 h
Resolution 1280 x 800 pixels
Contrast Ratio*1 20,000:1 (All white/all black, Iris: On, Image mode: Dynamic, Daylight View: Off, Lamp control: Normal)
Screen size [diagonal] 1.27–2.54 m (50–100 in), 16:10 aspect ratio
Center-to-corner zone ratio*1 85 %
Lens Fixed zoom, manual focus lens, F = 1.8, f = 6.08 mm, throw ratio: 0.46:1 (Projection distance: 0.80 m [2.62 ft] for 80-inch image)
Keystone Correction Range Vertical: ±15 ° (Auto, Manual), Horizontal: ±15 ° (Manual)
Installation Ceiling/desk, front/rear
Terminals | HDMI In 1/HDMI In 2 HDMI 19-pin x 2 (Compatible with HDCP 1.4, Deep Color), Audio signal: Linear PCM (Sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Terminals | Computer 1 In D-sub HD 15-pin (female) x 1 [RGB/YPBPR/YC]
Terminals | Computer 2 In/1 Out D-sub HD 15-pin (female) x 1 [RGB/YPBPR] (Input/output switching)
Terminals | Video In Pin jack x 1
Terminals | Audio In 1 M3 (L,R) x 1
Terminals | Audio In 2 Pin jack x 2 (L,R)
Terminals | Audio Out M3 (L,R) x 1 (Variable)
Terminals | LAN RJ-45 x 1 for network connection, 10Base-T/100Base-TX, PJLink™ (Class 2) compatible
Terminals | Serial In D-sub 9-pin (female) x 1 for external control (RS-232C compatible)
Terminals | USB USB Type-A (for Memory Viewer/Wireless Module [ET-WML100/AJ-WM50 series*3 ]/Power supply [DC 5 V/2 A])
Terminals | Mini USB x 1 (Mini-USB connector for interactive function)
Power Supply AC 100–240 V, 50/60 Hz
Power Consumption 300 W
Built in Speaker 10 W monaural
Operation noise*1 Normal: 38 dB, Eco: 35 dB, Quiet: 30 dB
Dimensions (W x H x D) 335 x 134.1*4 x 329 mm (13 3/16˝ x 5 9/32˝*4 x 12 15/16˝ )
Weight*5 Approx. 3.9 kg (8.6 lbs)
Operating Environment Operating temperature*6 : Normal use: 5–40 °C (41–104 °F) at altitudes less than 1,400 m (4,593 ft); 5–35 °C (41–95 °F) at altitudes of 1,400–2,700 m (4,593–8,858 ft); Operating humidity: 20–80 % (No condensation)
Applicable Software Multi Monitoring & Control Software, Early Warning Software, Logo Transfer Software,Presenter Light Software (for Windows®)*7 , Wireless Projector for iOS/Android™*8 , LightPen3 Software for Windows/Mac, Whiteboard Software (for Windows)
Note *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 Lamp replacement cycle stated is maximum value, at which time brightness will have decreased to 50 %. Usage environment affects lamp replacement cycle. *3 ET-WML100 Series and AJ-WM50 Series devices are both compatible with all projectors in this series, and either can be used to enable the wireless network function. *4 With legs at shortest position. *5 Average value. May differ depending on the actual unit. *6 When [LAMP POWER] is set to [NORMAL] and the projector is operated at an elevation of 1,400 m (4,593 ft) or less, if the ambient temperature exceeds 35 °C (95 °F), [LAMP POWER] will be switched to [ECO] automatically to protect the projector. When [LAMP POWER] is set to [NORMAL] and the projector is operated at an elevation between 1,400 m (4,593 ft) and 2,700 m (8,858 ft), if the ambient temperature exceeds 30 °C (86 °F), [LAMP POWER] will be switched to [ECO] automatically to protect the projector. *7 When using Presenter Light Software, images are projected with 1280 x 800 dots or 1024 x 768 dots onto the screen. Also, your PC display resolution may be forcibly changed, and audio playback disrupted or become noisy, while images and sound are being transmitted. *8 When using the Wireless Projector app, display resolution differs depending on your iOS/Android ™ device and the display device. The maximum supported display resolution is WXGA (1280 x 800).