The PT-RS30K combines 3-Chip DLP with proprietary SOLID SHINE laser technology for brighter and immersive visual experiences. Designed for convenient and flexible on-site installation, along with a range of advanced features that promote lower cost of ownership, this projector produces magnificent image quality in large venue applications.
ULTRA-DURABLE FOR CONTINUOUS OPERATION
Dustproof for ultimate endurance
Combining hermetically sealed laser modules, a long-life Eco Filter, and a new air-intake system, the PT-RS30K is able to maintain picture quality in locations prone to dust contamination. Panasonic’s SOLID SHINE Laser products exceed rigorous dusting requirements to ensure stable operation in dusty environments containing 0.150 mg of particulate matter per cubic metre1.
24/7 reliable operation
With the dual drive laser optical engine, it groups laser diodes into two discrete light sources. This means an uninterrupted projection even in the unlikely event a light source fails - ideal for mission-critical applications and high profile events. It also helps minimise brightness and colour degradation over the 20,000-hour maintenance-free service life.
*1 Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.
Advanced liquid cooling system assures stable operation
A unique liquid cooling system is designed to suppress temperature rises by protecting the laser engine and cooling the light source modules in high temperatures. This not only assures stable and continues operation during longer usage, it also eliminates the obtrusive and variable fan noise.
Uninterrupted coverage with backup input setting
An automatic backup input setting promises uninterrupted image display in venues such as control rooms, and giving added reassurance at events where projection can’t afford to be interrupted.
IMAGES THAT REPLICATE REAL LIFE EXPERIENCES
Experience true-to-life imagery with Detail Clarity Processor 5
New-generation circuitry analyses images frame by frame to clarify areas containing fine details and textures. Information from four frequency bandwidths is extracted using a bespoke algorithm, from super-high to low, to sharpen outlines, correct contours, and reduce ringing noise – further enhancing even the most delicate of details in 4K+ images.
20,000:1 dynamic contrast ratio
Digitally controlled frame-by-frame scene linking modulations allows you to achieve higher contrast ratio with less power consumption. Deep black levels and bright whites are delivered with outstanding depth and dimension, whilst accurate 20,000:1 contrast is achieved even when bright and dark scenes frequently interchange.
Fully optimised mapping and daylight projection
System Daylight View 3, Panasonic’s flagship daylight projection optimisation technology,
prevents pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colours.
Motion blur reduction feature
Images of up to 120 Hz*1 can be displayed with Dual-link 3G-SDI, DVI-D, and HDMI simultaneous inputs. Thanks to Panasonic’s Real Motion Processor, fast-moving images can be delivered with improved focus and smoother transitions for enhanced visibility.
CUSTOMISABLE SETUP AND DYNAMIC FUNCTIONALITY
Flexible projection from any angle
SOLID SHINE Laser technology enables free 360-degree installation through any axis. Courtesy of a powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion - either temporarily or in permanent applications.
Contrast sync and shutter functions
Contrast control and shutter timing are synchronized for multi-screen configurations, allowing for consistent picture quality across multiple screens. Meanwhile, the Shutter Sync function synchronises shutter on/off timing between all networked projectors.
Sophisticated image-adjustment software
Geometry Manager Pro is free software that offers more sophisticated image-adjustment functionality and makes complex multi-screen set up easy. An optional ET-UK20 upgrade kit with Geometry Manager Pro software supports colour matching, edge blending for multi-projector set ups. It’s flexile and complex geometric adjustment capability suits a wide variety of screen shapes.
Early Warning Software ET-SWA100 Series (optional)
Early Warning Software monitors the status of projectors and displays connected to an intranet, and notifies the operator when issues are detected or predicted. This helps to minimise downtime and provides stable and continuous operation.
Common Lenses for Panasonic 3-Chip DLP™ Projectors
Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, so you can switch and change lenses to suit the venue. This reduces the total cost of ownership for staging and event companies with large projector requirements.
*1 Refresh-rate varies depending on vertical scanning frequency.
Click an icon to find out more about the technology used
- Download image - 127.13 KB
- Download image - 3.34 MB
- Download image - 2.48 MB
- Download image - 6.42 MB
- Download image - 4.39 MB
- Download image - 4.11 MB
- Download image - 8.99 MB
- Download image - 7.49 MB
- Download image - 3.96 MB
- Download image - 3 MB
- Download image - 4.16 MB
- Download image - 3.08 MB
- Download image - 4.11 MB
- Download image - 1.71 MB
- Download image - 2.35 MB
There are currently no key services available.
There are currently no other services available.
|Power Supply||AC 100-120 V, 50/60 Hz; AC 200-240 V, 50/60 Hz|
|Power Consumption||2,870 W (2,870 VA AC200V) Average power consumption Varies depending on operation mode setting.) HIGH: 2,310W NORMAL: 1,890W LONG LIFE 1: 1,040-1,680W LONG LIFE 2: 924-1,580W LONG LIFE 3: 794-1,460W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297ft), IEC627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast  0.3 W with STANDBY MODE set to ECO 4 W with STANDBY MODE set to NORMAL|
|BTU Value||Max 9,806 BTU|
|DLP™ Chip | Panel Size||24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)|
|DLP™ Chip | Display Method||DLP™chip x 3 (R, G, B), DLP™projection system|
|DLP™ Chip | Pixels||1,470,000 (1400 x1050) x3, total of 4,410,000 pixels|
|Lens||Optional powered zoom/focus lenses|
|Light Source||Laser Diode Laser class 1|
|Illumination Life of Set||Varies depending on operation mode setting. Luminance life for set: 18,000 hours at half luminance (HIGH)/ 8,000 hours at 70% luminance 20,000 hours at half luminance (NORMAL) 43,800 hours at constant luminance (LONG LIFE 1)/ 61,320 hours at constant luminance (LONG LIFE 2)/ 87,600 hours at constant luminance (LONG LIFE 3) * IEC62087: 2008 Broadcast contents, Dynamic contrast |
|Filter Life||Varies depending on operation mode setting.|
|Filter Life | Normal Filter||4,000 hours (NORMAL)/2,000 hours (HIGH)/ 20,000 hours (LONG LIFE 1/2/3)|
|Filter Life | Long Life Filter Unit||20,000 hours (NORMAL)/4,000 hours (HIGH)/ 40,000 hours (LONG LIFE 1/2/3)|
|Screen Size||1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE95 (4:3 aspect ratio)|
|Brightness*1||Varies depending on operation mode setting. 30,000 lm*2*4/31,000 lm*3*4 (Center) (HIGH) 25,000 lm*2*4/26,000 lm*3*4 (Center) (NORMAL) 12,000 lm at constant luminance (LONG LIFE 1) 10,000 lm at constant luminance (LONG LIFE 2) 8,000 lm at constant luminance (LONG LIFE 3)|
|Contrast*1||20,000:1 (full on/full off, in Dynamic Contrast 3 mode)|
|Resolution||1400 x1050 pixels (Input signals that exceed this resolution will be converted to 1400 x1050 pixels.)|
|Scanning Frequency | Video/Y/C||fH:15.73KHz fV:59.94Hz, fH:15.63KHz fV:50Hz|
|Scanning Frequency | RGB||• Resolution: 640 x 400 pixels to 1920 x 1200 pixels • Dot clock frequency: 162MHz or less • PIAS (Panasonic Intelligent Auto Scanning)|
|Scanning Frequency | YPBPR (YCBCR)||• Resolution: 480i/576i to 1920 x 1080 pixels • Dot clock frequency: 148.5MHz or less • The SYNC/HD and VD terminals do not support 3 value SYNC.|
|Scanning Frequency | DVI||• Moving image signal resolution: 480i*5/576i*5 to 1920x1080 Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace) • Dot clock frequency: 25 MHz to 162 MHz|
|Scanning Frequency | HDMI/DIGITAL LINK||• Moving image signal resolution: 480i*5/576i*5 to 1920x1080 Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace) • Dot clock frequency: 25 MHz to 162 MHz|
|Scanning Frequency | SDI||SD-SDI signal HD-SDI signal 3G-SDI signal|
|Optical Axis Shift | Vertical||±50% (±40% with the ET-D75LE6), (+67-71% with the ET-D75LE95), from center of screen, powered|
|Optical Axis Shift | Horizontal||±30% (±20% with the ET-D75LE6), (±8% with the ET-D75LE95), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.|
|Installation||Ceiling/floor, front /rear, free 360-degree installation|
|Terminals | RGB 1 In||BNC x 5|
|Terminals | RGB 1 In | R, G, B||R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic|
|Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)||Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals | RGB 1 In | Y/C||Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms|
|Terminals | RGB 1 In | Video in||BNC x 1, 1.0 Vp-p, 75 ohms|
|Terminals | RGB 2 In||D-sub HD 15-pin (female) x 1|
|Terminals | RGB 2 In | R, G, B||R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic|
|Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)||Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals | DVI-D In||DVI-D 24-pin x1 Single link, DVI 1.0 compliant, HDCP compatible|
|Terminals | HDMI In||HDMI 19-pin x1 HDCP compatible, Deep Color compatible|
|Terminals | SDI In 1||BNC x 1 SD-SDI signal SMPTE ST 259 compliant HD-SDI signal SMPTE ST 292 compliant 3G-SDI signal SMPTE ST 424 compliant Dual link HD-SDI (LINK-A) signal SMPTE ST 372 compliant Dual link 3G-SDI (Link 1) signal SMPTE ST 425 compliant|
|Terminals | SDI In 2||BNC x 1 SD-SDI signal SMPTE ST 259 compliant HD-SDI signal SMPTE ST 292 compliant 3G-SDI signal SMPTE ST 424 compliant Dual link HD-SDI (LINK-B) signal SMPTE ST 372 compliant Dual link 3G-SDI (Link 2) signal SMPTE ST 425 compliant|
|Terminals | DIGITAL LINK||RJ-45 HDBaseT™ compliant, HDCP compatible, Deep Color compatible|
|Terminals | 3D Sync 1 In/Out / Multi Projector Sync In||BNC x 1, IN : TTL Hi-z OUT : TTL max10mA|
|Terminals | 3D Sync 2 Out/Multi Projector Sync Out||BNC x 1, TTL max10mA|
|Terminals | Serial In||D-sub 9 pin x 1 for external control (RS-232C compliant)|
|Terminals | Serial Out||D-sub 9 pin x 1 for link control|
|Terminals | Remoter 1 In||M3 stereo mini jack x 1 for wired remote control|
|Terminals | Remoter 1 Out||M3 stereo mini jack x 1 for link control|
|Terminals | Remoter 2 In||D-sub 9 pin x 1 for external control (parallel)|
|Terminals | DIGITAL LINK/LAN||RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP)|
|Terminals | DC Out 5V||USB connector (type A) x 2 for power supply only (DC 5V, Max.900mA)|
|Power Cord Length||3.0 m (9 ft 10 in) ft|
|Cabinet Materials||Processed metal parts, Molded plastic|
|Dimensions (W x H x D)||700 x 418*8x1,250 mm (27-9/16 x 16-15/32 x 49-7/32 inches) (with protrusion parts) 700 x 373*9x1,070 mm (27-9/16 x 14-11/16 x 42-1/8 inches) (without protrusion parts)|
|Weight*10||79 kg (174.2 lbs)|
|Operation Noise*2||49 dB|
|Operating Temperature||Varies depending on operation mode setting. HIGH/NORMAL The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Less than 1,400m (4,593 ft) above sea level) The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Less than 1,400m (4,593 ft) to 4,200m (13,780 ft) above sea level) • If using at ambient operating temperatures of 35 °C (95 °F) or higher and at less than 2,700m (8,858 ft) above sea level, or at ambient operating temperatures of 25 °C (77 °F) or higher and between 2,700m (8,858 ft) and 4,200m (13,780 ft) above sea level, the brightness of the light source may drop in order to protect the projector. LONG LIFE 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Less than 2,700m (8,858 ft) above sea level) • If using at ambient operating temperatures of 35 °C (95 °F) or higher, the brightness of the light source may drop in order to protect the projector. When using a smoke cut lter (regardless of operating mode) 0 °C to 40 °C (32 °F to 104 °F) Less than 1,400 m (4,953 ft) above sea level|
|Operating Humidity||10%-80% (no condensation)|
|Note||For details of the types of video signals that can be used with the projector, refer to “List of compatible signals” *1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the ISO/IEC 21118:2012 international standards. *4 In AC200V, When using a projection lens other than ET-D75LE95. *5 Pixel-Repetition signal(dot clock frequency 27.0MHz) only *6 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen. *7 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°. *8 With legs at shortest position. *9 Without legs. *10 Average value. May differ depending on the actual unit.|
|Brightness||30,000 lm/ 31,000 lm (Center)|
|Technology||3-Chip DLP Laser|